DTF - DIRECT TO FILM TRANSFERS

SETUP

TEMPERATURE: 275- 300°

TIME: 10 - 15 seconds

PRESSURE: Heavy / 60 lbs

PEEL: Instant Hot Peel

REPRESS: Yes

INSTRUCTIONS

  • Heat your press to 275- 300°.
  • Pre-press garment for 5 - 7 seconds to remove wrinkles/moisture.
  • Place transfer on garment with the colored side up.
  • Do NOT cover with any type of cover sheet. This includes Teflon, Parchment Paper, etc. This will result in a reduction in temp and impede adhesion.
  • Press for 15 seconds.
  • Immediately peel the film in one quick motion. You film should practically fall off of the shirt.
  • Cover with parchment paper or a spare t-shIrt and re-press for 5 seconds.

TIPS & TRICKS

  • Our transfers are instant HOT peel. The transfer film should peel off with little to no effort.
  • If the design is not sticking to the garment, you may have cold spots or uneven pressure. Rotate your garment and press again.
  • If you have a design that is larger than your press, you can press a portion of the design and then press the other portion.